DiscoDavis Posted November 10, 2015 Report Share Posted November 10, 2015 I think so far only Bear has seen my rig, and ours are fairly similar Well I was out in Half Moon Bay this Sunday and fortunately one of my passengers brought a good camera. This should make up for not bringing her out to the DiTD at Anudeep's place! http://i1168.photobucket.com/albums/r485/DiscoDavis/22865461336_806ca5d836_k_zpsjr0x34ac.jpg Link to comment Share on other sites More sharing options...
Disco2Guy Posted November 10, 2015 Report Share Posted November 10, 2015 Nice sticker combo:) Been wanting to do a similar layout on the D2. Link to comment Share on other sites More sharing options...
LandRonB Posted November 10, 2015 Report Share Posted November 10, 2015 Good seeing you @ the DITD; very nice LR3 and stickers combo. What other project(s) do you have in mind? Link to comment Share on other sites More sharing options...
DiscoDavis Posted November 10, 2015 Author Report Share Posted November 10, 2015 Nice sticker combo:) Been wanting to do a similar layout on the D2. Thanks! I'm gonna try and keep the scheme simple for now... it's so hard to choose what to slap on there Good seeing you @ the DITD; very nice LR3 and stickers combo. What other project(s) do you have in mind? Thanks! You too. For now I'm probably going to clear the roof off since I commute, so hilift stays home and the spare migrates to the top of the drawers. The interim goal for now is to have something I can reasonably use for most things since I have just the rover as a daily driver. In the future I'll grab something to put commute miles on, but the current idea is to keep the rover modular. Then later I'll start throwing the heavy duty things like bumpers at it. To Do List: >Extend drawers to middle row for sleeping platform>Waterproof seat covers for front row>skinny socket extensions and a 22mm or 7/8" socket for easy spare tire winch access through drawer floor>Seal and redrain/reduct stock air intake in place of a mantec/OEM "snorkel"(RAI)>Add manual EAS disconnect switch @ driver's position>migrate the AUX input to glovebox or other>Max trax or other traction device>Traxxide kit>ARB front bumper + winch>Limblifters>Kaymar rear, modify spindle>second fullsize spare>New front diff (OEM), ARB airlocker @ rear w/compressor by expansion tank>weather sealed and labeled comprehensive spares kit. (something that covers the maximum amount of problem areas but remains manageable in size) Link to comment Share on other sites More sharing options...
aebrownleeiv Posted May 1, 2017 Report Share Posted May 1, 2017 She's slick looking Link to comment Share on other sites More sharing options...
DHappel Posted May 1, 2017 Report Share Posted May 1, 2017 She's slick looking Old thread...she's more "sick" looking than you'd think these days..... Link to comment Share on other sites More sharing options...
Jethro Posted May 1, 2017 Report Share Posted May 1, 2017 Old thread...she's more "sick" looking than you'd think these days.....Ha ha ha... Sent from my Nexus 9 using Tapatalk Link to comment Share on other sites More sharing options...
Jethro Posted May 1, 2017 Report Share Posted May 1, 2017 Thanks! I'm gonna try and keep the scheme simple for now... it's so hard to choose what to slap on there Thanks! You too. For now I'm probably going to clear the roof off since I commute, so hilift stays home and the spare migrates to the top of the drawers. The interim goal for now is to have something I can reasonably use for most things since I have just the rover as a daily driver. In the future I'll grab something to put commute miles on, but the current idea is to keep the rover modular. Then later I'll start throwing the heavy duty things like bumpers at it. To Do List: >Extend drawers to middle row for sleeping platform>Waterproof seat covers for front row>skinny socket extensions and a 22mm or 7/8" socket for easy spare tire winch access through drawer floor>Seal and redrain/reduct stock air intake in place of a mantec/OEM "snorkel"(RAI)>Add manual EAS disconnect switch @ driver's position>migrate the AUX input to glovebox or other>Max trax or other traction device>Traxxide kit>ARB front bumper + winch>Limblifters>Kaymar rear, modify spindle>second fullsize spare>New front diff (OEM), ARB airlocker @ rear w/compressor by expansion tank>weather sealed and labeled comprehensive spares kit. (something that covers the maximum amount of problem areas but remains manageable in size)Time to update this build thread...😂 Sent from my Nexus 9 using Tapatalk Link to comment Share on other sites More sharing options...
DHappel Posted May 1, 2017 Report Share Posted May 1, 2017 Time to update this build thread... Sent from my Nexus 9 using TapatalkYeah, he forgot to add "install life-raft" to the list! To quote a famous movie line...."OK, who's the U-boat commander?" Link to comment Share on other sites More sharing options...
aebrownleeiv Posted May 1, 2017 Report Share Posted May 1, 2017 Bottom of a frozen lake? Link to comment Share on other sites More sharing options...
DiscoDavis Posted May 1, 2017 Author Report Share Posted May 1, 2017 Sssssh she's with the angels now... Link to comment Share on other sites More sharing options...
aebrownleeiv Posted May 1, 2017 Report Share Posted May 1, 2017 RIP poor lady. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.